---

Getting Started

Renowned for their great sound quality, comfortable design, and consistent performance at a reasonable price, JBL Tune 710BT headphones are a popular choice. But, like any other audio device, they might occasionally have problems compromising sound quality. You’re not alone if your JBL Tune 710BT headphones show distorted audio, muted sound, or other quality issues. Many people have comparable problems, but most of them are really simple to resolve.

This post will walk you through the most frequent reasons of sound quality problems with your JBL Tune 710BT headphones and offer practical solutions to address them. Whether your problem is low volume, distorted sound, or connection troubles, you will discover helpful advice to bring your headphones back to their best performance.

---

Why Does My JBL Tune 710BT Sound Bad?

It’s important to first grasp why sound quality could decline before exploring the remedies. Common causes of bad sound in Bluetooth headphones as the JBL Tune 710BT are:

• Problems with Bluetooth connectivity: Weak connections or interference might cause dropouts or poor sound quality.
  
• A low or defective battery could impair the performance of your headphones, including sound quality.
  
• Audio Source Issues: Occasionally, the problem might not be with the headphones per se but rather with the audio source.
  
• Hardware or Software Issues: Sound issues might also result from internal parts or old firmware.
  
• Your device’s audio settings can be wrong, hence affecting sound output.
  

Finding the underlying reason will help you more to know how to solve the problem.

---

Improving Sound Quality on JBL Tune 710BT Headphones

These are some efficient ways to raise the sound quality of your JBL Tune 710BT headphones.

---

Examine Your Bluetooth Link

Audio dropouts, delays, or a loss of sound quality can result from a weak or erratic Bluetooth connection. To remedy this:

• Make sure Bluetooth is on both on your headphones and the device you’re connecting to.
  
• Re-pair the headphones: From the Bluetooth settings of your device, disconnect and forget your JBL Tune 710BT. Then, couple them once more to join them back.
  
• Minimize Interference: Physical barriers and interference from other wireless devices might degrade Bluetooth performance. Ensure there are no major obstacles between your headphones and the device.
  
• Make sure your headphones have the most current firmware loaded. Old firmware can cause performance problems including sound quality decline.
  

---

Make sure the battery is completely charged

A low battery on your JBL Tune 710BT headphones could compromise the general sound output. Here is what you can do:

• Before using your headphones, plug them in for a complete charge. Weaker audio signals or distorted sound could be caused by low battery.
  
• Some gadgets show the battery % of linked Bluetooth devices. Monitor this to prevent unexpected audio drops caused by low power.
  

---

Change the audio settings on your device

The problem could lie with the audio settings on your device rather than the headphones. You may maximize your settings by doing this:

• Make sure the volume settings on both your device and your headphones are right. At times, the level on one device could be too low, which would create problems with audio.
  
• Many cellphones and audio gadgets include built-in equalization adjustments. Ensure the settings are not overly severe or distorted. For balanced sound, use the flat or default preset.
  
• Some gadgets offer audio improvements—such as bass boost or surround sound—that could distort. Switch off any such functions and evaluate the audio quality.
  

---

Reset or Update Firmware

Outdated software can be causing your JBL Tune 710BT headphones to underperform. Here is how to update or reset your firmware:

• Visit the official JBL website or use the JBL app to look for the most recent updates for your headphones. Updating firmware guarantees the resolution of any audio problems or defects.
  
• Factory Reset: Should a firmware update fail to address the issue, think about factory resetting your headphones. Restoring them to their original settings may help to fix any sound-related problems.
  

---

Check the hardware for damage

Should you still be having sound quality problems after doing all the aforementioned procedures, the fault may lie with the internal parts of your headphones. Physical damage or wear and tear over time might cause this. Here is what you can do:

• Look for external damage: Examine the cord (if wired), headband, and ear cushions for any apparent damage. Physical damage to the headphones could change sound quality.
  
• Reach out to customer support: Contact JBL support for help or a possible replacement should the headphones still be under warranty.
  

---

Typical JBL Tune 710BT Sound Quality Problems and Their Remedies

Let’s review some frequent concerns with sound quality that users experience with JBL Tune 710BT headphones and their respective solutions.

---

1. Low Sound Quality During Calls

If the sound quality is poor when making or receiving calls, it can be due to:

• Poor Bluetooth Connection: Ensure a solid connection between the device and headphones.
  
• Audio Settings: Check the microphone and speaker settings on your phone or device.
  
• Try Using Another App: Sometimes, specific apps may create sound quality issues during calls. Test with different communication apps.
  

---

2. Distorted or Muffled Sound

This issue can happen when there’s interference or a weak Bluetooth connection. You can fix this by:

• Re-pairing the gadget: Disconnect the gadget from your Bluetooth settings and reconnect it.
  
• Try connecting to another device to check whether the problem still exists.
  
• Changing loudness Settings: Occasionally, high loudness can cause distortion. Consider reducing the volume a little.
  

---

3. Audio Dropouts

Usually, frequent audio dropouts result from connection issues. Here is how to fix it:

• Keep Your Headphones Near the Device: Steer clear of significant physical barriers between your headphones and the device.
  
• Look for Interference: The Bluetooth signal could be affected by other wireless devices as Wi-Fi routers, microwaves, etc.
  

---

READ ABOUT:Quotient Front Headphones: A Complete Guide to Finding the Best of Sound Quality

Commonly Asked Questions

---

How can I reset my JBL Tune 710BT headphones?
Press and hold the volume up and down keys concurrently for roughly five seconds until the LED indication flashes to reset your JBL Tune 710BT headphones.

---

What can I do to raise the sound quality of my Bluetooth headphones?
Ensure your device’s Bluetooth connection is stable, your headphones are completely charged, and you’re utilizing a suitable audio source with correct settings.

---

Should my JBL headphones lack sound, what should I do?
Make sure there is no physical damage to the headphones, check the volume settings, and re-pair the Bluetooth connection.

---

How long do headphones JBL Tune 710BT last?
When completely charged, the JBL Tune 710BT headphones usually last about 30 hours of continuous playback.

---

What causes distortion in my JBL headphones?
Low battery, Bluetooth interference, or wrong audio settings might cause distortion. Make sure the Bluetooth connection is stable and the gadget is completely charged.

---

Final Thoughts

Usually, correcting sound quality problems on your JBL Tune 710BT headphones is simple. Following these advice—verifying your Bluetooth connection, charging the headphones, changing settings, and upgrading firmware—you will greatly enhance the audio experience. Should the issue continue, check the hardware or contact customer service for more support.